77
Appendix III 2D Scan Engine
MicroQR Enable
Aztec Enable
Aztec Inverse Decide whether to decode Aztec Inverse.
Decode regular Aztec barcodes only.
Decode inverse Aztec barcodes only.
Decode both regular and inverse Aztec barcodes.
Regular Only
2D Symbologies - Macro PDF ---
Macro PDF is a special feature for concatenating multiple PDF barcodes i
Macro PDF417 or Macro MicroPDF417.
Transmit/Decode Mode Decide how to handle Macro PDF decoding.
Buffer All Symbols / Transmit Macro PDF When Complete
Transmit all decoded data from an entire Macro PDF
sequence only when the entir
e sequence is scanned and
decoded. If the decoded data exceeds the limit of 50
symbols, no transmission because the entire sequence
was not scanned!
Transmit Any Symbol in Set / No Particular Order
Transmit data from each Macro PDF symbol as decoded,
regardless of the sequence.
Transmit and decode all Macro PDF symbols and
perform no processing. In this mode, the host is
responsible for detecting and parsing the Macro PDF
sequences.
Passthrough
All Symbols
ESC Characters When enabled, it uses the backslash "\
" as an Escape
character for systems that can process transmissions
containing special data sequences. It will format special
data according to the Global Label Identifier (GLI)
protocol, which only affects the data portio
n of a Macro
PDF symbol transmission. The Control Header, if enabled,
is always sent with GLI formatting.
None
Note: When printing barcodes, keep each Macro PDF sequence separate, as each has a
unique identifier. Do not mix barcodes from several Macro PDF sequences, even if
they encode the same data. When you scan Macro PDF sequences, scan the entire
Macro PDF sequence without interruption!
To Previous Page
Loading...
Need help?
General
