24
For more detailed information and useful tips, visit
www.circupool.com/help.
Proper operation of the chlorine generator can be easily verified by
checking the lights on the control panel. However, if the pool remains
cloudy, or the chlorine residual tests low, then the chlorine being
produced is being lost due to high chlorine demand or improper water
conditions.
To reduce the chlorine demand, check the pH and Stabilizer (Cyanuric
Acid) reading. Check for phosphates and nitrates, which commonly
contribute to severe chlorine demand. If tests show correct, then a
shock treatment with an oxidizer agent is advised. Generally,
superchlorination is not necessary if the pool is maintained at correct
levels.
Recommendations and Helpful Hints:
Recommended List
• Read and keep your manual in a safe place.
• Increase Chlorine Production when temperature goes up.
• Increase Chlorine Production when number of guests goes up.
• Use Stabilizer (Cyanuric Acid) to protect free chlorine in pool.
• Mount Control Module in shade or out of the direct sunlight whenever
possible.
• Decrease Chlorine Production when temperature goes down.
• Take pool water sample to a Pool Professional at least once per
month.
Not Recommended List
• Do not allow fertilizer anywhere near your pool. Fertilizers are one of
many sources that contain Nitrates or Phosphates which cause severe
chlorine demand in pool water.
• Never use dry acid to adjust pH. A build-up of by-products can damage
the Cell.
• Do not add any chemicals (including salt) to the skimmers.
• Do not let salinity level drop below 3000 ppm.
To Next Page
Loading...
