URBAN DC
18
Installation Guide
B
Foundation
450
250
119
230
320
300
Measures in mm
• Place the foundation bolts into
the template using the provided
nuts with the help of a 24mm
open-end wrench.
• Once the kit is assembled, it must
be placed in the ground taking
into consideration the following
measures.
Note: If there is any further doubt about the terrain regarding the installation of this unit,
due to the weight and dimensions, it will be necessary to define a final solution to install the
unit. It shall be performed an specific technical project made by an architectural firm prior
to its installation.
220
130
500
300
Front view
Side view
400
To Next Page
Loading...
