URBAN DC
26
Installation Guide
6
A
Standby
B
Start charging
When LED beacon is green and the START button is also green, it means that the unit is
available and ready to start a charge transaction (A status, according to IEC 61851).
Now, to start a new charge transaction, simply plug the cable.
Once the cable is plugged, you are allowed to press START button,
which is still in green colour.
C
Charging
The charge transaction starts when STOP button gets red. The LED beacon still continues
being blue.
As detailed in previous chapters, the unit has a LED beacon light and two illuminated buttons,
the START and STOP ones.
The LED beacon light is located in the top of side view where the cable is.
At this moment, the charge transaction is about to start. The LED beacon shows a fix blue (B
status, according to IEC 61851) and the START button blinks in green, which means that the
car and the chaging station have communication between them.
URBAN DC BASIC Serie it is not configurable.
To Next Page
Loading...
