URBAN DC
19
Installation Guide
C
1 2
Opening
1.- Introduce provided URBAN DC key in the lock located at the mid part
of the unit and the security key at the top and bottom locks of the unit.
Then, the unit is unlocked and ready to be opened.
2. - Pull outward the Tamper switch
(4)
to operate the Charge Point.
(4)
Tamper Switch: The Charge Point has a security switch (antitamper protection) installed
that will avoid any charging session if the doors are opened.
It has three positions.
1. - Operative postition: The Charge Point is closed.
2.- Error position: The Charge Point is opened without supervision.
3.- Mantenance position: The Charge Point is opened under maintenance (Pulling otward
the tamper switch).
To Next Page
Loading...
