3-66 P/N 23020-002
Cirrus SR20 and SR22 Flight Operations Manual
Section 3 Standard Operating Procedures
Arrival/Engine Shutdown
Complete the shutdown checklist as a flow pattern. Verify with the
checklist to ensure all items have been accomplished when completed
with the flow. The avionics switch may be left on during engine
shutdown. Notify maintenance personal immediately and do not move
the propeller if a hot magneto is found during the shutdown process.
The aircraft should be parked on a ramp or in a hangar. If the aircraft is
parked outside, it should be chocked and tied down if possible.
Arrival/Engine Shutdown Flow
June 2008
To Next Page
Loading...
