SpecificationDescription
RSP2Form factor
IEC320 C13/C15Input connector
Hardware Specifications
The following table lists the hardware specifications for the FMC 1600, 2600, and 4600.
Table 3: FMC 1600, 2600, and 4600 Hardware Specifications
460026001600Specification
1.7 x 16.89 x 29.8 in. (4.32 x 43.0 x 75.6 cm)Dimensions (H x W x D)
36.0 lb (17.0 kg)34.1 lb (16.8 kg)
32.2 lb (16.6 kg)Weight
Operating: 50 to 95°F (10 to 35°C)
Maximum temperature is derated by 1°F/547 ft (1°C/300 m) of altitude above 3117 ft (950 m).
Nonoperating: –40 to 149°F (–40 to 65°C)
When the appliance is stored or transported.
Temperature
Operating: 8 to 90% noncondensing
Nonoperating: 5 to 95% noncondensing
Relative humidity
Operating: 0 to 10,000 ft
Nonoperating: 0 to 40,000 ft when the appliance is stored or transported
Altitude
5.8 Bels (measure A-weighted per ISO7779 LWAd)
Operation at 73°F (23°C)
Sound power level
43 dBa (measure A-weighted per ISO7779 LpAM)
Operation at 73°F (23°C)
Sound pressure level
Product ID Numbers
The following table lists the field-replaceable PIDs associated with the FMC 1600, 2600, and 4600. The spare
components are ones that you can order and replace yourself. If any internal components fail, you must get a
return material authorization (RMA) for the entire chassis including the SFPs and SFP cables. Remove the
drives and power supplies before you send the chassis for RMA. See the Cisco Returns Portal for more
information.
Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide
15
Overview
Hardware Specifications
To Next Page
Loading...
Need help?
General
