Table 4: FMC 1600, 2600, and 4600 PIDs
DescriptionPID
AC power supplyFMC-M5-PS-AC-770W
AC power supply (spare)FMC-M5-PS-AC-770W=
FMC 1600 and 4600 1.2-TB driveFMC-M5-HDD-1.2TB
FMC 1600 and 4600 1.2-TB drive (spare)FMC-M5-HDD-1.2TB=
FMC 2600 600-GB driveFMC-M5-HDD-600G
FMC 2600 600-GB drive (spare)FMC-M5-HDD-600G=
Rail kitUCSC-RAILB-M4
Power Cord Specifications
Each power supply has a separate power cord. Standard power cords or jumper power cords are available for
connection to the FMC 1600, 2600, and 4600. The jumper power cords for use in racks are available as an
optional alternative to the standard power cords.
If you do not order the optional power cord with the system, you are responsible for selecting the appropriate
power cord for the product. Using a incompatible power cord with this product may result in electrical safety
hazard. Orders delivered to Argentina, Brazil, and Japan must have the appropriate power cord ordered with
the system.
Only the approved power cords and jumper cords provided with the FMC 1600, 2600, and 4600 are supported.
Note
The following power cords and jumper cords are supported.
Figure 10: Argentina (CAB-250V-10A-AR)
Cord set rating: 10 A, 250 V2Plug: IRAM 20731
—Connector: IEC 60320/C133
Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide
16
Overview
Power Cord Specifications
To Next Page
Loading...
