Cisco 1601 - Router - EN - Page 114

DSL Interface Cards
Related Documentation
18
OL-12846-01
Related Documentation
Related documentation is available on Cisco.com or on the Product Documentation DVD. For more
information, see the “Obtaining Documentation, Obtaining Support, and Security Guidelines” section
on page 19.
Feature Modules
– Configuring Cisco G.SHDSL HWICs in Cisco Access Routers
– 1-Port ADSL WAN Interface Card for Cisco 2600 Series and Cisco 3600 Series Routers, Cisco
IOS Release 12.2(4)T
– 1-Port ADSL WAN Interface Card, Cisco IOS Releases 12.1(3)XJ and 12.2(2)T
– 1-Port ADSL WAN Interface Card, Cisco IOS Release 12.1(5)YB
– ATM Mode for Two-Wire or Four-Wire SHDSL, Cisco IOS Release 12.3(7)T
– T1/E1 Mode for SHDSL, Cisco IOS Release 12.3(7)T
– 1-Port G.SHDSL WAN Interface Card for Cisco 2600 Series Routers, Cisco IOS Release
12.2(4)XL
– Enhanced Voice and QoS for ADSL and G.SHDSL, Cisco IOS Release 12.3(2)T
– Enhanced Voice and QoS for ADSL and G.SHDSL on Cisco 1700 Series, Cisco 2600 Series,
Cisco 3600 Series, and Cisco 3700 Series Routers, Cisco IOS Releases 12.2(8)YN and
12.2(13)T
– Voice and Quality of Service Features for ADSL and G.SHDSL on Cisco 1700, Cisco 2600, and
Cisco 3600 Series Routers, Cisco IOS Releases 12.2(4)XL and 12.2(13)T
Sample Configurations
– Configuring IPSec Over ADSL on a Cisco 2600/3600 With ADSL-WIC and Hardware
Encryption Modules
– Configuring a Cisco 1700/2600/3600 ADSL WIC With a Single IP Address, DHCP, PPPoA, and
PPP-PAP
– Configuring a Cisco 1700/2600/3600 ADSL WIC With IP Unnumbered E0, DHCP, PPPoA, and
PPP-PAP
– Configuring a Cisco 1700/2600/3600 ADSL WIC With IP Unnumbered E0, PPPoA, PPP-PAP,
and Manually Configured Local LAN Devices
– Configuring a Cisco 1700/2600/3600 ADSL WIC (Unnumbered Interface) With RFC1483
Routing Using AAL5SNAP Protocol IP
– Configuring a Cisco 1700/2600/3600 ADSL WIC With RFC1483 Routing Using AAL5SNAP
Protocol IP
– Configuring a Cisco 1700/2600/3600 ADSL WIC Using PPPoA With CHAP and PAP
– Configuring a Cisco 1700/2600/3600 ADSL WIC With IRB and NAT Using RFC1483 Bridging
– Configuring a Cisco 1700/2600/3600 ADSL WIC With NAT, a DHCP Server, and Easy IP Using
PPPoA (aal5mux ppp)
– Configuring a Cisco 1700/2600/3600 ADSL WIC as a PPPoE Client With NAT,
– Configuring Network Address Translation and Static Port Address Translation to Support an
Internal Web Server