Cisco 1601 - Router - EN - Supported Cisco Radio Antennas

Access Point High-Speed WAN Interface Cards
Access Point High-Speed WAN Interface Cards
5
OL-12854-01
Supported Cisco Radio Antennas
Table 40 lists the Cisco antennas that are supported for use on the single-mode access point HWIC.
Table 40 Cisco Antennas Supported on the Single-Mode Access Point HWIC
Cisco Part Number Antenna Type Maximum Gain Description
AIR-ANT4941 Omnidirectional 2.2 dBi This is the default antenna. Swivel-mount dipole
antenna operating in the 2.4-to 2.5-GHz band.
This antenna is designed for use with Cisco
wireless products utilizing an RP-TNC
connector. For more information, see the
Cisco Aironet 2.4 GHz Articulated Dipole
Antenna (AIR-ANT4941) document.
AIR-ANT1728 Omnidirectional 5.2 dBi Ceiling-mount antenna operating in the 2.4- to
2.5-GHz band. This antenna has a clip that
allows it to be mounted to a drop-ceiling cross
member. For more information, see the
Cisco Aironet High-Gain Omnidirectional
Ceiling Mount Antenna (AIR-ANT1728)
document.
Note This antenna is not supported in Japan.
AIR-ANT3549 Patch 9 dBi Wall-mount antenna operating in the 2.4- to
2.5-GHz band.
Note This antenna is not supported in the
United States and Canada.
AIR-ANT5959 Diversity
omnidirectional
2 dBi Ceiling-mount antenna operating in the 2.4- to
2.5-GHz band. This antenna has a clip that
allows it to be mounted to a drop-ceiling cross
member. For more information, see the
Cisco Aironet 2-dBi Diversity Omnidirectional
Ceiling Mount Antenna (AIR-ANT5959)
document.