Cisco Interface Cards for Cisco Access Routers
Cisco Network Modules Supporting Cisco Interface Cards
11
OL-12796-01
Cisco Network Modules Supporting Cisco Interface Cards
Some Cisco network modules have interface card slots to allow installation of Cisco interface cards.
These network modules have either one or two interface card slots, supporting either voice or data
interface cards. See Figure 15 and Figure 16 for sample 1-slot and 2-slot network modules.
Note Some combination voice/data interface cards are supported on 1- or 2-slot network modules. However,
interface card functionality is limited to either voice or data applications. See Table 1 for more
information.
Figure 15 Sample 1-Slot Network Module
Figure 16 Sample 2-Slot Network Module
For information on installing interface cards onto network modules, see Installing Cisco Interface Cards
in Cisco Access Routers.
For more information about Cisco network modules, see the Cisco Network Modules Hardware
Installation Guide.
1 Interface card slot 0
VOICE
2V
V0V1
EN
H10834
1
1 Interface card slot 1 2 Interface card slot 0
2E
2W
W1
STP
ETHERNET 0ETHERNET 1
AUI
EN
ACT
LNK
WO
ACT
ILNK
H8603
1 2