Cisco 1601 - Router - EN - Installing a SIM Card in the HWIC-3 G-GSM

REVIEW DRAFT—CISCO CONFIDENTIAL
3G Wireless WAN Interface Cards
Installing a SIM Card in the HWIC-3G-GSM
7
OL-12853-01
Installing a SIM Card in the HWIC-3G-GSM
To install a SIM card onto the GSM HWIC, follow these steps:
Step 1 On the bottom side of the 3G wireless HWIC, remove the bracket by unscrewing the M2.5 screw. See
Figure 127 for details.
Figure 127 SIM Card installation Step 1
170613
O
PEN
LO
CK
3
2
1
1 SIM Card Bracket 3 M2.5 screw
2 SIM socket