Installing Cisco Interface Cards in Cisco Access Routers
Installing Cisco Interface Cards in Cisco Access Routers
8
OL-12842-01
Figure 17 Installing a Blank Interface Card Faceplate
Step 3
Repeat for every empty interface card slot.
Step 4 Continue with hardware installation tasks.
Removing Blank Faceplates
To remove blank faceplates, perform the following steps:
Step 1 Using either a number 1 Phillips screwdriver or a small flat-blade screwdriver, unscrew the captive
screws and remove the blank faceplate from the chassis slot you plan to use. (See Figure 18.)
Figure 18 Removing a Blank Interface Card Faceplate
Tip Save blank faceplates for future use.
Step 2 Continue with hardware installation tasks.
1 Blank interface card faceplate
1
121073
1 Blank interface card faceplate
1
121078
To Next Page
Loading...
