Cisco 1800 Series Configuring

Configuring Radio Settings on an Access Point
Configuration Examples for Radio Settings on an Access Point
27
DETAILED STEPS
Configuration Examples for Radio Settings on an Access Point
This section contains the following examples:
• Configuring Radio Data Rates: Example
Configuring Radio Data Rates: Example
The following example shows how to disable the 1-Mbps data rate and set the rest of the data rates to
basic:
configure terminal
interface dot11radio 0
no speed basic-2.0 basic-5.5 basic-11.0
end
copy running-config startup-config
Command or Action Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
• Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
dot11 phone
Example:
Router(config)# dot11 phone
Enables IEEE 802.11 compliance phone support.
Step 4
end
Example:
Router(config-if)# end
Returns to privileged EXEC mode.
Step 5
copy running-config startup-config
Example:
Router# copy running-config startup-config
(Optional) Saves your entries in the configuration file.

Cisco 1800 Series Specifications

General

Category	Network Router
Performance	Varies by model
Form Factor	Desktop
Connectivity Technology	Wired
Remote Management Protocol	SNMP, Telnet, HTTP, HTTPS
Dimensions	Varies by model
Weight	Varies by model
Model	1800 Series
Interfaces	Ethernet, Fast Ethernet, Serial, ISDN
Routing Protocols	RIP, OSPF, EIGRP, BGP
Security	Firewall, VPN, ACLs
Data Link Protocol	Ethernet, Fast Ethernet, Serial, Frame Relay
Network / Transport Protocol	TCP/IP
Features	Quality of Service (QoS), VLAN support, DHCP server
RAM	Varies by model
Flash Memory	Varies by model
Power Supply	Internal AC power supply
Operating Temperature	0 to 40 °C (32 to 104 °F)
Storage Temperature	-4°F to 149°F (-20°C to 65°C)