Cisco 1800 Series Configuring

Configuring Radio Settings on an Access Point
How to Configure Radio Settings on an Access Point
4
• Configuring RTS Threshold and Retries on an Access Point, page 22 (optional)
• Configuring Maximum Data Retry on an Access Point, page 24 (optional)
• Configuring Packet Fragmentation Threshold on an Access Point, page 25 (optional)
• Configuring IP Phone Support on an Access Point, page 26 (optional)
Configuring Universal Client Mode
Perform this task to configure universal client mode.
You can configure universal client mode on a Cisco ISR series router by setting the radio interface station
role to nonroot. This is different from configuring the dot11radio interface to operate in non-root bridge
mode, which requires specifying the word bridge at the end of the command, for example, station-role
non-root bridge.
Note In other Cisco wireless products such as the Cisco AP1232, the station-role non-root command
operates the same as station-role non-root bridge command. On the ISRs, the two commands are
different: station-role non-root is considered the universal client mode and station-role non-root
bridge is considered the nonroot bridge mode.
SUMMARY STEPS
1. enable
2. configure terminal
3. interface dot11Radio interface
4. station-role {root [access-point | ap-only | bridge [wireless-clients]] | non-root [bridge]}
5. end
6. copy running-config startup-config

Cisco 1800 Series Specifications

General

Category	Network Router
Performance	Varies by model
Form Factor	Desktop
Connectivity Technology	Wired
Remote Management Protocol	SNMP, Telnet, HTTP, HTTPS
Dimensions	Varies by model
Weight	Varies by model
Model	1800 Series
Interfaces	Ethernet, Fast Ethernet, Serial, ISDN
Routing Protocols	RIP, OSPF, EIGRP, BGP
Security	Firewall, VPN, ACLs
Data Link Protocol	Ethernet, Fast Ethernet, Serial, Frame Relay
Network / Transport Protocol	TCP/IP
Features	Quality of Service (QoS), VLAN support, DHCP server
RAM	Varies by model
Flash Memory	Varies by model
Power Supply	Internal AC power supply
Operating Temperature	0 to 40 °C (32 to 104 °F)
Storage Temperature	-4°F to 149°F (-20°C to 65°C)