Cisco 2500 Series

Spectralink VIEW Certified Configuration Guide: Cisco Controllers and APs
721-1001-000-AH.docx
December 2016 28
3 In the navigation pane under 802.11b/g/n, select Media, then select the Video tab.
4 Select the Admission Control (ACM) checkbox. Set the Max RF Bandwidth for Video to
5. If available, ensure that the Reserved Roaming Bandwidth is set to 5%.
Admin Tip: Disable WLAN before changing Admission Control settings.
Any WLAN using the network must be disabled before changing Admission Control
settings.