Spectralink VIEW Certified Configuration Guide: Cisco Controllers and APs
721-1001-000-AH.docx
December 2016 46
12 Under the Advanced tab
a Set the DTIM to 1 for the radio that corresponds to the Spectralink Wireless handset
configuration.
b Ensure the Enable Session Timeout box is unchecked and that Client Exclusion is
disabled.
c Uncheck the Client Load Balancing and Client Band Select boxes.
d Check off-channel scanning defer for the 0 priority class (prevents contention
between off-channel scanning and PTT).
Cisco 7.0 versions:
To Next Page
Loading...
