Cisco 2911

105
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
Chapter Configuring Backup Data Lines and Remote Management
Configuring Backup Interfaces
!
ip dhcp pool miercom
network 10.1.0.0 255.255.0.0
default-router 10.1.0.254
dns-server 10.1.0.254
!
ip dhcp pool wlan-clients
network 10.9.0.0 255.255.0.0
default-router 10.9.0.254
dns-server 10.9.0.254
!
!
!
multilink bundle-name authenticated
!
chat-script gsm "" "atdt*99#" TIMEOUT 180 "CONNECT"
chat-script cdma "" "atdt#777" TIMEOUT 180 "CONNECT"
!
!
license udi pid CISCO1941W-A/K9 sn FHH1249P016
!
!
archive
log config
hidekeys
!
redundancy
!
!
!
track 234 ip sla 1 reachability
!
!
!
interface Loopback0
ip address 1.1.1.1 255.255.255.255
!
!
interface Wlan-GigabitEthernet0/0
description Internal switch interface connecting to the embedded AP
!
!
interface GigabitEthernet0/0
ip address dhcp
ip virtual-reassembly
load-interval 30
shutdown
duplex auto
speed auto
!
!
interface wlan-ap0
description Service module interface to manage the embedded AP
ip address 192.168.1.1 255.255.255.0
arp timeout 0
no mop enabled
no mop sysid
!
!
interface GigabitEthernet0/1
ip address 10.1.0.254 255.255.0.0
ip nat inside
ip virtual-reassembly
shutdown