Cisco 2911 Configuration Guide

175
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
Chapter Unified Communications on Cisco Integrated Services Routers
Unified Communications Gateways
TDM Gateways
The Cisco 3900 series and Cisco 2900 series ISRs support the following type of time-division
multiplexing (TDM) gateways:
• Voice Gateways, page 175
• Video Gateway, page 175
Voice Gateways
Cisco IOS voice gateways connect TDM equipment such as private branch exchanges (PBXs) and the
PSTN to VoIP packet networks. The Cisco ISR voice gateway routers support the widest range of packet
telephony-based voice interfaces and signaling protocols within the industry, providing connectivity
support for more than 90 percent of all PBXs and public-switched-telephone-network (PSTN)
connection points. Signaling support includes T1/E1 Primary Rate Interface (PRI), T1 channel
associated signaling (CAS), E1-R2, T1/E1 QSIG protocol, T1 Feature Group D (FGD), Basic Rate
Interface (BRI), foreign exchange office (FXO), ear and mouth (E&M), and foreign exchange station
(FXS). These voice gateway are highly scalable from just a few analog connections to up to 24 T1 or E1
interfaces.
The Cisco ISR series voice gateway routers can communicate with the Cisco Unified Communications
Manager using Session Initiation Protocol (SIP), H.323, or Media Gateway Control Protocol (MGCP).
The Cisco IOS voice gateway routers can also connect directly to other Cisco voice gateway routers
using SIP or H.323 and to various other VoIP destinations and call agents.
For more information, see ISDN Voice, Video and Data Call Switching with Router TDM Switching
Features at:
http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00804794c6.shtml.
For details about tuning voice ports, see Cisco IOS Voice Port Configuration Guide, Release 12.4T at
Cisco.com at:
http://www.cisco.com/en/US/docs/ios/voice/voiceport/configuration/guide/12_4t/vp_12_4t_book.html.
Video Gateway
The Integrated Data, Voice, and Video Services for ISDN Interfaces feature allows multimedia
communications between H.320 endpoints and H.323, SIP, or Skinny Client Control Protocol (SCCP)
endpoints.
See Integrating Data, Voice, and Video Services for ISDN Interfaces at Cisco.com for details about
setting up a Video gateway (http://www.cisco.com/en/US/docs/ios/12_4t/12_4t11/h320gw.html.)
See Cisco IOS H.323 Configuration Guide, Release 12.4T at Cisco.com for details about the H.323
protocol (http://www.cisco.com/en/US/docs/ios/voice/h323/configuration/guide/12_4t/
vh_12_4t_book.html).

Cisco 2911 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.1Q, IEEE 802.1ag, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3ah, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
DHCP client	-
Routing protocols	BGP, EIGRP, OSPF
Supported protocols	IPv4, IPv6, IS-IS, IGMPv3, PIM SM, SSM, DVMRP, IPSec, GRE, BVD, MPLS, L2TPv3, PPP, MLPPP, MLFR, HDLC, RS-232, RS-449, X.21, V.35, EIA-530, PPPoE, ATM
USB version	2.0
RS-232 ports	1
Expansion slots	4 x EHWIC 2 x DSP 1 x ISM
USB ports quantity	2
Ethernet LAN (RJ-45) ports	3
Firewall security	Cisco IOS
Input current	2.2 A
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	47 - 63 Hz
Power consumption (typical)	50 W
Product color	Black
Rack capacity	2U
Operating altitude	0 - 4000 m
Non-operating altitude	0 - 4570 m
Storage temperature (T-T)	-40 - 80 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 85 %
Safety	UL 60950-1, CAN/CSA C22.2 No. 60950-1, EN 60950-1, AS/NZS 60950-1, IEC 60950-1
Electromagnetic compatibility	47 CFR, ICES-003, EN55022, CISPR22, AS/NZS 3548, VCCI V-3, EN 300-386, EN 61000, EN 55024, CISPR 24EN50082-1

Weight and Dimensions

Depth	304.8 mm
Width	438.2 mm
Height	88.9 mm
Weight	8200 g