Cisco 2911

108
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
OL-20696-04
Chapter Configuring Backup Data Lines and Remote Management
Configuring Backup Interfaces
!
route-map nat2cell permit 10
match ip address 101
match interface Dialer1
!
!
!
control-plane
!
!
!
line con 0
exec-timeout 0 0
line aux 0
line 0/0/0
exec-timeout 0 0
script dialer cdma
login
modem InOut
no exec
transport input all
transport output all
autoselect ppp
rxspeed 3100000
txspeed 1800000
line 67
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
line vty 0 4
login
!
exception data-corruption buffer truncate
scheduler allocate 20000 1000
event manager applet pri_back
event track 234 state any
action 2.0 cli command "clear ip nat trans forced"
!
end
Router#