Cisco 2911

191
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
Chapter Configuring Next-Generation High-Density PVDM3 Modules
Information About Configuring the PVDM3 Module on Cisco Voice Gateway Routers
7. shutdown
8. exit
DETAILED STEPS
Command or Action Purpose
Step 1
enable
Example:
Router> enable
Enable privileged EXEC mode
• Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enter global configuration mode.
Step 3
controller e1 slot/port
Example:
Router(config)# controller e1 0/0/0
Enter config-controller mode.
Step 4
shutdown
Example:
Router(config-controller)# shutdown
Administratively shuts down the controller port.
Step 5
exit
Example:
Router(config-controller)# exit
Exit config-controller mode.
Step 6
voice-port slot number/port
Example:
Router(config)# voice-port 0/0/0:1
Enter config-voiceport mode.
Step 7
shutdown
Example:
Router(config-voiceport)# shutdown
Administratively shuts down the voice port.
Step 8
exit
Example:
Router(config-voiceport)# exit
Exit config-voiceport mode.
Use the exit command till you are in privileged
EXEC mode.