Name: Cisco 2921
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide

Chapter Configuring Ethernet Virtual Connection Bridge Domain

Support for Y.1731 Performance Monitoring for EVC BD

Note To display information about remote (target) MEPs on destination devices, use the show ethernet cfm

maintenance-points remote command.

SUMMARY STEPS

Step 1 enable

Step 2 configure terminal

Step 3 ip sla operation-number

Step 4 ethernet y1731 delay dmm domain domain-name {evc evc-id | vlan vlan-id} {mpid target-mp-id |

mac-address target-address} cos cos {source {mpid source-mp-id | mac-address source-address}}

Step 5 clock sync

Step 6 aggregate interval seconds

Step 7 distribution {delay | delay-variation} one-way number-of-bins boundary[,...,boundary]

Step 8 frame interval milliseconds

Step 9 frame offset offset-value

Step 10 frame size bytes

Step 11 history interval intervals-stored

Step 12 max-delay milliseconds

Step 13 owner owner-id

Step 14 end

DETAILED STEPS

Command Purpose

Step 1

enable

Example:

Router> enable

Enables the privileged EXEC mode.

Enter your password when prompted.

Step 2

configure terminal

Example:

Router# configure terminal

Enters the global configuration mode.

Step 3

ip sla operation-number

Example:

Router(config-term)# ip sla 10

Begins configuring an IP SLAs operation and enters IP

SLA configuration mode.

Questions and Answers:

Need help?

Do you have a question about the Cisco 2921 and is the answer not in the manual?

Cisco 2921 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.1Q, IEEE 802.1ag, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3ah, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
Product color	Black
Rack capacity	2U
USB version	2.0
RS-232 ports	1
USB ports quantity	2
Ethernet LAN (RJ-45) ports	3
DHCP client	-
Routing protocols	BGP, EIGRP, OSPF
Supported protocols	IPv4, IPv6, IS-IS, IGMPv3, PIM SM, SSM, DVMRP, IPSec, GRE, BVD, MPLS, L2TPv3, PPP, MLPPP, MLFR, HDLC, RS-232, RS-449, X.21, V.35, EIA-530, PPPoE, ATM
Firewall security	Cisco IOS
Operating altitude	0 - 3000 m
Non-operating altitude	0 - 4570 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 85 %
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	47 - 63 Hz
Safety	UL 60950-1, CAN/CSA C22.2 No. 60950-1, EN 60950-1, AS/NZS 60950-1, IEC 60950-1
Electromagnetic compatibility	47 CFR, ICES-003, EN55022, CISPR22, AS/NZS 3548, VCCI V-3, EN 300-386, EN 61000, EN 55024, CISPR 24EN50082-1