If you do not order the optional power cord with the system, you are responsible for selecting the appropriate
power cord for the product. Using a incompatible power cord with this product may result in electrical safety
hazard. Orders delivered to Argentina, Brazil, and Japan must have the appropriate power cord ordered with
the system.
Only the approved power cords or jumper power cords provided with the Secure 3100 are supported.
Note
The following power cords are supported.
Figure 16: Argentina (CAB-ACR)
Cord set rating: 10 A, 250 V2Plug: EL 219/IRAM 20731
Cord length: 2.5 mConnector: IEC 60320/C133
Figure 17: Australia (CAB-ACA)
Cord set rating: 10 A, 250 V2Plug: A.S. 31121
Cord length: 2.5 mConnector: IEC 60320/C133
Figure 18: Brazil (CAB-C13-ACB)
Cisco Secure Firewall 3100 Series Hardware Installation Guide
36
Overview
Power Cord Specifications
To Next Page
Loading...
