You cannot swap SSDs between different platforms. For example, you cannot use a 2100 series SSD in a
3100 series model.
Caution
See Product ID Numbers, on page 33 for a list of the PIDs associated with the Secure Firewall 3100 SSDs.
Figure 14: SSD
—SSD release tab1
For More Information
• See Front Panel LEDs, on page 11 for the location and description of the SSD LEDs on the front panel.
• See Remove and Replace the SSD, on page 67 for the procedure for removing and replacing the SSD.
• See the configuration guide for your software for the procedures for removing and adding an SSD from
the RAID1 configuration.
Supported SFP/SFP+/QSFP+ Transceivers
The SFP/SFP+/QSFP+ transceiver is a bidirectional device with a transmitter and receiver in the same physical
package. It is a hot-swappable optical or electrical (copper) interface that plugs into the SFP/SFP+/QSFP+
ports on the fixed ports and the network module ports, and provides Ethernet connectivity.
Cisco Secure Firewall 3100 Series Hardware Installation Guide
28
Overview
Supported SFP/SFP+/QSFP+ Transceivers
To Next Page
Loading...
