The chassis is thoroughly inspected before shipment. If any damage occurred during transportation or any
items are missing, contact your customer service representative immediately.
Note
To inspect the shipment:
Step 1 Remove the server from its cardboard container and save all packaging material.
Step 2 Compare the shipment to the equipment list provided by your customer service representative and the list given below.
Verify that you have all items.
Step 3 Check for damage and report any discrepancies or damage to your customer service representative. Have the following
information ready:
• Invoice number of shipper (see the packing slip)
• Model and serial number of the damaged unit
• Description of damage
• Effect of damage on the installation
Figure 4: Shipping Box Contents
Prepare for Server Installation
• Installation Guidelines, on page 12
• Rack Requirements, on page 12
• Equipment Requirements, on page 13
• Slide Rail Adjustment Range, on page 13
Cisco Secure Network Server 3500 Series Appliance Hardware Installation Guide
11
Before You Begin
Prepare for Server Installation
To Next Page
Loading...
Need help?
General