CHAPTER 3
Install the Cisco SNS 3515 and Cisco SNS 3595
Hardware Appliances
• Install the Cisco SNS 3515 and Cisco SNS 3595 Hardware Appliances, on page 15
• Cisco Integrated Management Controller, on page 25
Install the Cisco SNS 3515 and Cisco SNS 3595 Hardware
Appliances
This section describes how to install your Cisco SNS 3515 or 3595 appliance and connect it to the network.
It contains:
• Install the Cisco SNS 3515 or 3595 Appliance in a Rack, on page 15
• Cisco Integrated Management Controller, on page 25
• Connect Cables, on page 20
• Connect and Power On the Cisco SNS 3515 or 3595 Appliance, on page 23
Before you begin the installation, read the Regulatory Compliance and Safety Information for the Cisco SNS
3515 or Cisco SNS 3595 Hardware Appliance.
Warning: Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Warning
Warning: This unit is intended for installation in restricted access areas. A restricted access area can be accessed
only through the use of a special tool, lock and key, or other means of security.
Statement 1017
Warning
Install the Cisco SNS 3515 or 3595 Appliance in a Rack
This section describes how to install the Cisco SNS 3515 or Cisco SNS 3595 appliance in a rack.
Cisco Secure Network Server 3500 Series Appliance Hardware Installation Guide
15
To Next Page
Loading...
Need help?
General