Cisco 3600 Series Hardware Installation Guide

3-56
Cisco 3600 Series Routers Hardware Installation Guide
OL-2056-05
Chapter 3 Installing the Router
Configuring the Router
!
interface FastEthernet0/0
no shutdown
media-type 100BaseX
half-duplex
ip address 172.1.2.3 255.255.0.0
!
interface FastEthernet0/1
shutdown
no ip address
!
end
Step 12 Respond to the following prompts. Select [2] to save the initial configuration.:
[0] Go to the IOS command prompt without saving this config.
[1] Return back to the setup without saving this config.
[2] Save this configuration to nvram and exit.
Enter your selection [2]: 2
Building configuration...
Use the enabled mode 'configure' command to modify this configuration.
Press RETURN to get started!
Step 13 The user prompt appears:
3600>
After you complete the initial configuration tasks, your Cisco router is ready to configure for specific
functions. For configuration procedures, refer to the Software Configuration Guide for Cisco 2600
Series, Cisco 3600 Series, and Cisco 3700 Series Routers or the Cisco IOS software configuration
documentation. You can access these documents on Cisco.com and on the Documentation CD-ROM.

Cisco 3600 Series Specifications

General

Brand	Cisco
Model	3600 Series
Category	Network Router
Language	English