Cisco 3750 - Recommended Cabling Configurations

Chapter 3 Switch Installation
Planning the Stack
3-14
Catalyst 3750 Switch Hardware Installation Guide
78-15136-01
Figure 3-4 Example of a Stack with a Failover Condition
Figure 3-5 Example of a Partitioned Stack with a Failover Condition
Recommended Cabling Configurations
This section describes the recommended cabling configurations for stacking the
switches.
Rack Mounting in Vertical Racks or Table Tops
Figure 3-6 is an example of a recommended configuration using the supplied
0.5-meter StackWise cable. In this example, the switches are stacked in a vertical
rack or on a table top. This configuration provides redundant connections.
86822
A
B
C
86824
A
B