Cisco 3750 - Removing Screws from the Switch

Chapter 3 Switch Installation
Installing the Switch
3-18
Catalyst 3750 Switch Hardware Installation Guide
78-15136-01
Removing Screws from the Switch
If you plan to install the switch in a rack, you must first remove screws in the
switch chassis so that mounting brackets can be attached. Figure 3-10 and
Figure 3-11 shows how to remove the chassis screws in a 1RU switch and
a 1.5RU switch.
Figure 3-10 Removing Screws from the Catalyst 3750-24TS, 3750G-24T, and 3750-48TS Switches
Figure 3-11 Removing Screws from the 3750G-24TS Switch
Catalyst 3750
SERIES
23X
24X
1
2
16
17
18
19
20
21
22
23
24
86819
Catalyst 3750
SERIES
23X
24X
23
24
25
26
27
28
86820