Chapter 3 Switch Installation
Connecting the StackWise Cable to the StackWise Ports
3-36
Catalyst 3750 Switch Hardware Installation Guide
78-15136-01
Note When the connectors are not being used, replace the dust covers on them
for protection.
Figure 3-32 Inserting the StackWise Cable in a StackWise Port
When you need to remove the StackWise cable from the connector, make sure to
fully unscrew the screws before removing the connector. Also make sure you
remove the correct screws from the StackWise port. See Figure 3-33 for correct
removal procedures and Figure 3-34 for incorrect removal procedures.
CONSOLE
STACK 1
STACK 2
86549
To Next Page
Loading...
