Cisco 5510 - ASA SSL / IPsec VPN Edition Getting Started Guide

v
Cisco ASA 5500 Series Getting Started Guide
78-19186-01
Contents
Powering On the Adaptive Security Appliance 6-9
What to Do Next 6-9
CHAPTER 7 Configuring the Adaptive Security Appliance 7-1
About the Factory Default Configuration 7-1
Using the CLI for Configuration 7-2
Using the Adaptive Security Device Manager for Configuration 7-3
Preparing to Use ASDM 7-4
Gathering Configuration Information for Initial Setup 7-4
Installing the ASDM Launcher 7-5
Starting ASDM with a Web Browser 7-8
Running the ASDM Startup Wizard 7-8
What to Do Next 7-9
CHAPTER 8 Scenario: DMZ Configuration 8-1
Example DMZ Network Topology 8-1
An Inside User Visits a Web Server on the Internet 8-3
An Internet User Visits the DMZ Web Server 8-4
An Inside User Visits the DMZ Web Server 8-6
Configuring the Adaptive Security Appliance for a DMZ Deployment 8-8
Configuration Requirements 8-9
Information to Have Available 8-10
Enabling Inside Clients to Communicate with Devices on the Internet 8-10
Enabling Inside Clients to Communicate with the DMZ Web Server 8-10
Translating Internal Client IP Addresses Between the Inside and DMZ
Interfaces 8-11
Translating the Public Address of the Web Server to its Real Address on
the Inside Interface 8-14
Configuring Static PAT for Public Access to the DMZ Web Server (Port
Forwarding) 8-17

Cisco 5510 - ASA SSL / IPsec VPN Edition Specifications

General

Brand	Cisco
Model	5510 - ASA SSL / IPsec VPN Edition
Category	Firewall
Language	English