Remove the Feature Configured on a Line Key
You can remove the feature configured on a line key.
If your phone is monitoring a Busy Lamp Field (BLF) list, removing the feature configured on a line key
makes the line key available for monitoring the BLF list. This can change the positions of BLF list keys. See
Activate or Deactivate Monitoring of the BLF List, on page 21 for details.
You cannot remove some features configured by your administrator.
Note
Procedure
Step 1 Press and hold down the line key for two seconds.
Step 2 On the Select feature screen, select None.
Step 3 When prompted to confirm, press OK.
Add a Menu Shortcut to a Line Key
After you configure a line key with a menu shortcut, you can open the menu with a simple press on the line
key.
Before you begin
Your administrator must enable this feature on your phone.
Procedure
Step 1 Press and hold a line key for two seconds. The available feature list is displayed.
Step 2 Select Menu shortcut from the list. The available menu list is displayed.
Step 3 Scroll the list and select the menu you want to add to the line key and press Set.
Remove the Menu Shortcut from a Line Key
Procedure
Step 1 Press and hold the line key for two seconds. The available feature list is displayed.
Cisco IP Phone 6800 Series Multiplatform Phones User Guide
23
Your Phone
Remove the Feature Configured on a Line Key
To Next Page
Loading...
Need help?
General
