Cisco 7925G-EX - Page 100

90
Search for a contact
in your phone book
1. Choose > Phone Book or press Ph Book (if available).
2. Choose Options > Mode and enter the text to search. You can search for
first name, last name, nickname, and company name.
Note You can enter search text in one of two ways: by pressing a key one or
more times until you see the letter or number you need, or by having
possible matches automatically display after pressing one or more keys
(predictive text).
Choose Options > Mode again to change the way you enter search text.
Remove a contact
from the phone book
1. Choose > Phone Book or press Ph Book (if available).
2. Highlight a contact name and choose Options > Delete.
The contact is removed and the speed dial for this contact number will
be unassigned.
Dial the primary
phone number for a
contact
1. Choose > Phone Book or press Ph Book (if available).
2. Highlight a contact name. The primary phone number for this contact is
displayed on the lower left. To dial this number, press
or Options
> Dial.
Note The default primary number for a contact is the work phone. You can
change the primary number to be any number for this contact.
Dial any phone
number for a contact
1. Choose > Phone Book or press Ph Book (if available).
2. Highlight a contact name, then do one of the following:
– Scroll left or right until you see the icon for the phone number you
wish to dial:
work phone, home phone, mobile

phone, or other phone.
– Choose Options > Details, highlight a phone number, and press
or Options > Dial.
Clear all entries from
your phone book
1. Choose > Phone Book or press Ph Book (if available).
2. Press Options and select DeleteAll.
Copy a phone
number from a call
log to a new phone
book contact
1. Choose > Missed Calls, or Received Calls, or Placed Calls.
2. Scroll to a phone number, choose Options > Store > New Contact. The
Store Contact screen appears.
3. Enter the information for: First Name, Last Name, Nickname, and
Company.
4. When finished, choose Options > Save, then select the phone type to store
the number.
If you want to... Then...