18
Securing the Phone with a Lock Set and Cable Lock
You can secure the phone to a desk top by ordering the lock set from Cisco. For more information,
refer to the
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Accessory Guide.
To install the lock set, use the diagram and follow these steps:
Note The lock set does not include the cable lock.
If you want to... Then...
Install the lock set on
the phone
1. Put the security cable around a post or through a hole in the desktop.
Insert the loops at the ends of the security cable through the C-ring.
2. Insert the C-ring with cable loops through the slot on back of phone.
3. Use the combination lock to secure the ends of the C-ring around cable
loops and phone.
The phone is secured to the desktop area.
To Next Page
Loading...
