Connecting Your Phone
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide 11
Note You can also charge your battery using a desktop charger or multi-charger. For more
information, see the
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G
Accessory Guide.
Using the AC Power Supply to Charge the Battery
You can charge your battery quickly by connecting the AC power supply to the phone. To
accommodate different AC power receptacles, you must insert the appropriate AC plug adapter on the
AC power supply.
You can use the phone while the battery is being charged. After the battery is charged, you can unplug
the power supply cord, or you can leave the phone plugged into the power cord.
Note Depending on configuration, your phone may automatically power off when it is connected
to an AC power source. AC power sources include the power supply, desktop charger, or
multi-charger. If the phone is in use (during a call or is using an XML phone service) when it
is connected to the AC power source, it will power off after the call or phone service
terminates.
For more information, ask your system administrator.
Battery Type
Charging Time if AC Power
Supply Connected to Phone
Charging Time if Phone Connected
to USB Port on PC with USB Cable
Standard 2 hours 5 hours
Extended 3 hours 7 hours
To Next Page
Loading...
Need help?
General
