Cisco 7940 Series

4
Connecting Your Phone
Typically, your service provider will setup each phone to connect to the corporate
IP telephony network. If that is not the case, refer to the graphic and table below to
connect your phone.
1
DC adaptor port (DC48V) for phones
not provided with in line power
5
Access port (10/100 PC) for connecting your
phone to your computer
2
AC-to-DC power supply
6
Handset port
3
AC power cord
7
Headset port
4
Network port (10/100 SW) for
connecting to the network
8
Footstand button