Cisco 871 User Manual

4
Cisco Virtual Office – End User Instructions for Cisco 871 and Cisco 881 Router Set Up at Home or Small Office
78-18858-01
CONFIGURE YOUR ROUTER
You will need to complete the process for Secure Device Provisioning (SDP) so that your CVO router
can access the corporate network and securely download its configuration.
If you are using Static addressing or PPPoE and used CCP Express for the initial configuration of your
router, specifying SDP for provisioning, then CCP Express will automatically direct you to the SDP
welcome page, where you have to authenticate using the login username/password that you configured
during the CCP Express setup (Figure 2).
Figure 2 SDP Authentication
If you’re using DHCP, to initiate the SDP process, go to the PC which is connected to the CVO router
and open a browser window. Then type in the address bar: http://10.10.10.1/ezsdd/welcome. You will be
prompted to authenticate, and you must use username/password cisco/cisco.

Cisco 871 Specifications

General

Flash memory	24 MB
Internal memory	128 MB
Operating altitude	0 - 3000 m
Non-operating altitude	0 - 4570 m
Storage temperature (T-T)	-20 - 65 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 85 %
Ethernet LAN	Yes
Cabling technology	10/100Base-T(X)
Networking standards	-
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
USB ports quantity	2
Ethernet LAN (RJ-45) ports	4
Security algorithms	3DES, AES, DES, EAP-FAST, EAP-MD5, EAP-SIM, EAP-TLS, EAP-TTLS, HTTPS, LEAP, PEAP, TKIP, WEP, WPA, WPA2
Product color	Black
Rack mounting	No

Weight and Dimensions

Depth	215.9 mm
Width	260.4 mm
Height	50.8 mm
Weight	954 g