Table 1: Wired Microphone Buttons
DescriptionItem
Mute button.1
Wireless Extension Microphone Kit
The optional wireless microphone extension kit enhances the room coverage of the conference phone. Two
wireless microphones can be paired to the conference phone.
Wireless microphones support an 8-hour call before the battery requires charging. The charger is separate
device, and is not connected to the conference phone.
LEDs on the wireless microphone base indicate the connection status of the microphone, and an icon will also
be displayed on the conference phone screen. The LEDs and the display screen also indicate the mute status
of the wireless microphone.
If your conference phone is to be configured to use wireless extension microphones, you can access the
configuration menu from the conference phone by choosing Apps > Admin Settings > Wireless Microphones.
From this menu, the user can choose which channel to set in pairing mode, initiate the pairing process, and
set the wireless microphone range.
The wireless microphone range is used to set the baseband power and effective RF range for the wireless
microphones. There are three possible setting for the wireless microphone range:
•
Low
•
Medium
Cisco Unified IP Conference Phone 8831 Administration Guide for Cisco Unified Communications Manager 9.0
5
Cisco Unified IP Conference Phone 8831 Installation
Wireless Extension Microphone Kit
To Next Page
Loading...
Need help?
General
