Cisco Aironet 1200 Series - Obtaining Technical Assistance

17
802.11a (5-GHz) Radio Upgrade Instructions
This section provides a step-by-step procedure for installing or replacing an
802.11a, 5-GHz radio module. The section contains the following topics:
• “Overview” section on page 17
• “Unpacking the Radio Module” section on page 18
• “Removing the 5-GHz Radio Access Cover” section on page 18
• “Removing a 5-GHz Radio Module” section on page 20
• “Installing a 5-GHz Radio Module” section on page 22
Overview
The following operations summarize the 5-GHz radio upgrade procedure:
1. Remove all cables and power connections from the access point.
2. For an access point without the 5-GHz radio feature, remove the access
cover.
3. For and access point with the 5-GHz radio feature, install the new 5-GHz
radio module.