Cisco Aironet 1200 Series - In Case of Difficulty

To Next Page

To Previous Page

Note If you are located outside the United States, you must adjust the

transmit output power to conform with the levels established by the

regulations for the country in which the access point operates. See

the Cisco Aironet 1200 Series Access Point Software Configuration

Guide for instructions.

Basic configuration instructions can be found in the Quick Start Guide Cisco

Aironet 1200 Series Access Point Running Cisco IOS Operating System,

which is shipped with the access point.

Detailed configuration instructions can be found in the Cisco Aironet 1200

Series Access Point Hardware Installation Guide or the Cisco Aironet 1200

Series Access Point Software Configuration Guide. These guides are

available at Cisco.com. Follow this link to access these documents:

http://cisco.com/en/US/products/hw/wireless/ps430/tsd_products_support_s

eries_home.html

In Case of Difficulty

If you followed the instructions in previous sections of this guide, you should

have had no trouble getting your access point installed and running. However,

if you did experience difficulty, help is available from Cisco. Before

contacting Cisco, look for a solution to your problem in the following places:

Other manuals for Cisco Aironet 1200 Series