3
1 About this Guide
This guide provides instructions on how to install and configure the Cisco Aironet 1815m Access
Point. This guide also provides mounting instructions and limited troubleshooting procedures.
The Cisco Aironet 1815m Access Point is referred to as the access point, or abbreviated as AP in this
document.
2 About the Access Point
The Cisco Aironet 1815m access point is an 802.11 a/b/g/n/ac (Wave 2) access point, with internal
antennas only. The access point can be mounted on a wall or a ceiling, and supports 2x2:2 SS
MU-MIMO applications.
Access Point Model Numbers and Regulatory Domains
The Cisco Aironet 1815m access point model has the model number format AIR-AP1815M-x-K9,
where the ‘x’ placeholder represents the regulatory domain. The ‘x’ can be any one of the supported
regulatory domains listed at:
http://www.cisco.com/go/aironet/compliance
To Next Page
Loading...
Need help?
General
