7
4 Unpacking the AP
To unpack the access point, follow these steps:
Step 1 Unpack and remove the access point and the mounting accessories, from the shipping box.
Step 2 Return any packing material to the shipping container and save it for future use.
Step 3 Verify that you have received the items listed below. If any item is missing or damaged, contact
your Cisco representative or reseller for instructions.
–
The access point.
–
Mounting bracket AIR-AP-BRACKET-8, only if selected when you ordered the access point.
Can be ordered separately also.
–
T-RAIL clips and Channel Adapter (only if selected when you ordered the access point).
5 Ports and Connectors on the AP
The 1815m series access points have an LED indicator on the face of the unit, above the Cisco logo,
as shown in Figure 1. For information on the LED scheme, see the “Access Point Status LED” section
on page 18.
The ports and connections on the access point are shown in Figure 2.
To Next Page
Loading...
Need help?
General
