Name: Cisco Aironet 1850 Series
Brand: Cisco
Rating: 5 (1 reviews)

To Next Page

To Previous Page

8 Performing a Pre-Installation Configuration

For a Cisco Mobility Express deployment, see the Cisco Mobility Express User Guide at this URL:

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/1/user_guide/b_ME_User_Guid

e.html

The following procedures ensure that your access point installation and initial operation go as

expected. This procedure is optional.

Note Performing a pre-installation configuration is an optional procedure. If your network

controller is properly configured, you can install your access point in its final location and

connect it to the network from there. See the “Deploying the Access Point on the Wireless

Network” section on page 20 for details.

The following Pre-Installation Configuration procedure given does not include configuring Link

Aggregation. For information on configuring Link Aggregation, see the Cisco Wireless LAN

Controller Configuration Guide, Release 8.1, at this URL:

http://www.cisco.com/c/en/us/td/docs/wireless/controller/8-1/configuration-guide/b_cg81.html

The pre-installation configuration setup is illustrated in Figure 3.

Other manuals for Cisco Aironet 1850 Series

Questions and Answers:

Need help?

Do you have a question about the Cisco Aironet 1850 Series and is the answer not in the manual?

General