Cisco Aironet 1850 Series Getting Started Guide

4
http://www.cisco.com/c/en/us/products/collateral/wireless/access-points/product_data_sheet0900aecd
80537b6a.html
Model numbers ending in C are factory-shipped with a Cisco Mobility Express software image. For
more information, see the Cisco Mobility Express User Guide at the following URL:
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/1/user_guide/b_ME_User_Guid
e.html
Access Point Features
The features of the 1850 series access points are:
• Supported mode(s) of operation:
– Centralized
• Supports Cisco Mobility Express solution. The 1850 series access point can operate as a master
AP (having an integrated wireless controller functionality) in a Cisco Mobility Express network.
For more information, see the Cisco Mobility Express User Guide at the following URL:
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/1/user_guide/b_ME_User_
Guide.html
• Radio features supported are:
– 2.4 GHz and 5 GHz concurrent radios
– 2 GHz radio with 3TX x 4RX and three spatial streams SU-MIMO
– 5 GHz radio with 4TX x 4RX 802.11ac Wave 2 capable with four spatial stream SU-MIMO
and 3 spatial streams MU-MIMO
– 802.11ac based Transmit Beamforming
– Quality of Service (QoS)
– Radio Resource Management (RRM)
– Rogue Detection
– BandSelect
• The AP supports the following hardware external interfaces:
– RS-232 Console Interface through RJ-45
– Local Power DC Jack
– Mode button. For information on how to use the Mode button, see “Using the Mode Button”
section on page 23.
– USB 2.0 port (no software support at this time)

Cisco Aironet 1850 Series Specifications

General

Wi-Fi Standards	802.11a/b/g/n/ac Wave 2
Frequency Bands	2.4 GHz and 5 GHz
Maximum Data Rate	1.7 Gbps
USB Port	1 x USB 2.0
Ethernet Ports	10/100/1000BASE-T autosensing (RJ-45)
PoE Support	802.3af/at
Mounting	Ceiling, Wall
Operating Temperature	0°C to 40°C (32°F to 104°F)
Weight	2.6 lb (1.2 kg)
MIMO	4x4