Cisco Aironet 1850 Series - Channel Rail Adapters

5
– One multi-color LED status indicator. See the “Checking the Access Point LEDs” section on
page 21 for information on the colors of the LED status indicator.
– 1 x 10/100/1000 Mbps WAN Ethernet Port (RJ-45), with PoE support.
– 1 x 10/100/1000 Mbps Auxiliary Ethernet port (RJ-45). For the Link Aggregation feature
only. Does not require or provide PoE support.
• 1852I model access point has four integrated 2.4 GHz/5 GHz dual-band antennas located near
each corner of the 1852I access point under the top housing. Peak antenna gain is approximately
3 dBi and 5 dBi in 2.4 GHz and 5 GHz bands respectively.
• The 1852E model supports up to four external antennas using the RTNC antenna connectors on
the top of the access point. The following Cisco external antennas are supported on the 1852E:
– AIR-ANT2524DB-R
– AIR-ANT2524DG-R
– AIR-ANT2524DW-R
– AIR-ANT2535SDW-R
– AIR-ANT2524V4C-R
– AIR-ANT2566P4W-R
– AIR-ANT2566D4M-R
– AIR-ANT2544V4M-R
A full listing of the access point's features and specification are provided in the Cisco Aironet 1850
Series Access Point Data Sheet, at the following URL:
http://www.cisco.com/c/en/us/products/collateral/wireless/aironet-1850-series-access-points/datashee
t-c78-734256.html