CHAPTER
1-1
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Card Installation Guide
78-17406-01
1
Safety Warnings, Recommendations, and Tools
Required
This chapter describes the safety warnings, recommendations, and tools required to install feature cards
in the chassis. This chapter contains the following sections:
• General Safety, page 1-1
• Maintaining Safety with Electricity, page 1-2
• Preventing Electrostatic Discharge, page 1-3
• Required Tools and Equipment, page 1-3
• Where to Go Next, page 1-4
General Safety
Any device that uses electricity must be handled carefully; follow these guidelines to ensure general
safety:
• Keep the chassis area clear and dust-free during and after installation.
• Put the removed chassis cover in a safe place.
• Keep tools away from walk areas where you and others could fall over them.
• Do not wear loose clothing that could get caught in the chassis. Fasten your tie or scarf and roll up
your sleeves.
• Wear safety glasses if you are working under any conditions that might be hazardous to your eyes.
• Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.
Warning
Ultimate disposal of this product should be handled according to all national laws and regulations.
Statement 1040
To Next Page
Loading...
