Cisco AS5350XM - Attaching the 8-Port T1 or E1 Feature Card Interface Cable to a Bracket (Optional

A-8
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Card Installation Guide
78-17406-01
Appendix A Cabling Specifications
8-Port T1 or E1 Feature Card Cable and Port Pinouts
Attaching the 8-Port T1 or E1 Feature Card Interface Cable to a Bracket
(Optional)
To attach the 8-port T1 or E1 cable to a bracket:
Step 1 Place the molded RJ-45 end of the cable on the bracket with the RJ-45 ports facing you. Align the two
holes on the molded RJ-45 end of the cable with the holes on the bracket. (See Figure A-7.)
Figure A-7 Placing the Molded RJ-45 End of the Cable on the Bracket
35058