6-2
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Card Installation Guide
78-17406-01
Chapter 6 Voice Feature Card
Overview
For configuration details, see the Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software
Configuration Guide. For information on voice and fax commands, see the Cisco IOS Voice
Configuration Library for your Cisco IOS software release at Cisco.com.
You can install a voice feature card in any card slot of the universal gateway chassis. The voice feature
card does not require external connections. (See Figure 6-1.)
Figure 6-1 Voice Feature Card
Restrictions for the Voice Feature Card
Voice feature cards are not compatible with universal port and dial-only feature cards. Voice feature
cards should not be installed on any system that has universal port and dial-only feature cards. Table 6-2
describes the behavior of the Cisco AS5350XM and Cisco AS5400XM universal gateways depending on
whether the voice feature card is present at power on.
135784
Table 6-2 Voice Feature Card Support During Power On
Feature Cards Present at Power On Feature Cards Supported
Voice feature card present at power on Voice feature card only. Any universal port and
dial-only feature cards present will not be
operational until the voice feature card is removed
and the system is rebooted.
Voice feature card not present at power on Universal port or dial-only feature cards only. Any
voice feature card installed later will not be
operational until the system is rebooted.
To Next Page
Loading...
