Cisco AS5350XM Installation Guide

Contents
v
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Card Installation Guide
78-17406-01
Removing PVDM2 Modules From the Voice Feature Card 6-9
Installing PVDM2 Modules in the Voice Feature Card 6-10
Digital Signal Processor Firmware 6-11
Getting Help 6-11
Where to Go Next 6-11
CHAPTER 7 Troubleshooting 7-1
LEDs 7-1
Mixing WAN Feature Cards 7-5
Mixing Universal Port and Dial-Only Feature Cards 7-6
Mixing Voice Feature Cards With Universal Port and Dial-Only Feature Cards 7-6
Monitoring the Chassis Environment 7-7
Displaying Environment Status 7-8
Using the Bantam Jack Ports to Monitor T1, E1, and CT3 Feature Cards 7-10
Using Drop and Insert Mode on the CT3 Feature Card 7-10
Troubleshooting Network Interfaces 7-11
Getting Help 7-11
APPENDIX A Cabling Specifications A-1
2-Port and 4-Port T1 or E1 Feature Card Cable and Port Pinouts A-1
8-Port T1 or E1 Feature Card Cable and Port Pinouts A-6
Attaching the 8-Port T1 or E1 Feature Card Interface Cable to a Bracket (Optional) A-8
CT3 Feature Card Cable and Port Pinouts A-12
Bantam Jack Port Pinouts A-13
I NDEX

Cisco AS5350XM Specifications

General

Brand	Cisco
Model	AS5350XM
Category	Gateway
Language	English