Cisco ASA 5545-X Cli Configuration Guide

1-21
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring Multiple Context Mode
Configuring Multiple Contexts
Detailed Steps
Command Purpose
Step 1
context name
Example:
hostname(config)# context administrator
Adds or modifies a context. The name is a string up to 32
characters long. This name is case sensitive, so you can have two
contexts named “customerA” and “CustomerA,” for example.
You can use letters, digits, or hyphens, but you cannot start or end
the name with a hyphen.
“System” or “Null” (in upper or lower case letters) are reserved
names, and cannot be used.
Step 2
(Optional)
description text
Example:
hostname(config-ctx)# description
Administrator Context
Adds a description for this context.

Cisco ASA 5545-X Specifications

General

Power Supply	Dual, Hot-swappable
Memory	8 GB
Flash Memory	8 GB
AC Input Voltage	100-240 VAC
Form Factor	1 RU
Number of VLANs	1024
Security Contexts	50
Interfaces	8 x Gigabit Ethernet
Frequency	50-60 Hz
Dimensions (H x W x D)	1.75 x 17.5 x 12 in (4.4 x 44.5 x 30.5 cm)
High Availability	Active/Standby
Storage	SSD (optional)